0.584.625 SIT Proflame 2 Ignition Control Board

The 0.584.625 Sit Proflame 2 IFC (integrated fireplace control) board is a device that allows the automatic ignition and pilot flame supervision to command the functions of an hearth appliance.

The Sit Controls Proflame 2 0.584.625 IFC board directly controls the pilot assembly and an automatic SIT Proflame Gas Controls 880, 886 and 885 service valve using low voltage electric power.

It is powered by Line voltage (AC) with a battery back up in case of main power loss. The battery back-up will not power any fans or lighting features when main power is lost.

Control Features of the 0.584.625 Control Module

This board can be toggled between either IPI (intermittent pilot ignition) or CPI (continuous pilot ignition) modes. It can be controlled via an electronic remote transmitter or wall switch.

The 0.584.625 can also control the comfort fan, accent lights, and an auxiliary output when used with fireplaces that support those features.

Specifications of the 0.584.625

• AC Supply Voltage and Frequency: 120V~60Hz max. 2.5A
• Battery Supply Voltage: 6V
• Ambient Operating Temperature: 14 to 176°F (-10 to 80°C)
• Radio frequency for Remote Control: 315 MHz
• Light Dimming Output: 120V~60Hz max. 0.5A (res.)
• Comfort Fan Output: 120V~60Hz max. 2A (0.5pf)
• Comfort Fan Startup Delay: 5 minutes
• Comfort Fan Shut-Off Delay: 12 minutes
• Burner Fan Output: 120V~60Hz max. 5A (0.5pf)
• Spark Voltage: >10kV over 5mm spark gap
• Spark Energy: >0,7mJ
• Spark Frequency: 1Hz
• Pilot Ignition Source: Intermittent/Continuous
• Flame Failure Response Time: 10 seconds
• Flame Failure Waiting Time: 2 seconds
• ATMO / FAN Pre-Purge Time: 2 seconds / 15 seconds
• ATMO / FAN Post-Purge Time: 2 seconds / 120 seconds
• Inter-Ignition Time: 30 seconds
• Safety Time: 60 seconds
• Number of Trials for Ignition: 2
• Recycle Time: 30 seconds

Dimensions:

• Length: 3-9/16 in.
• Board Width: 6-1/2 in.
• Distance Between Mounting Brackets: 6-7/8 in.
• Height: 1-5/8 in.